MAIN CHARACTERISTICS
Inhaling mask for an on demand and with over pressure oxygenation
system.
UTILISATION CONDITIONS
For use on all aircraft with sealed cabin up to an altitude of 15000
metres, on all aircraft without sealed cabin up to an altitude of 1 2000
metres and for a short period, up to 13500 metres.
Made in three sizes : 1, 2 and 3. Size 1 is the smallest size.
Monthly verification on ULMER 23. 29 or 693 and derivatives test
bench.
It must be used with a helmet
provided with oxygen mask attachment hook ULMER
Exemple :Rafale B01
PARTICULAR CONDITIONS
It is equipped with a face piece
and oxygen pipe (57 whorls) in silicone elastomer "ULSIL 322", (color
:Green Army).
The reinforcement shell
is made of plastic and the face piece of silicone elastomer ensuring
a perfect hold of the mask to the face in the event of ejection.
Le nouveau profil de la
calotte et de la coquille assure une trés bonne visibilité
vers le bas, dans le cas de pilotage des avions nouveaux "Siège
incliné".
The very enveloping form improves
the hold on the face for the ejections at high speed.
This mask comprises a breathing-out
valve specially designed to function during sharp accelerations up
to a value of 10 g.
The oxygen supply pipe ensures
the connection the feeding circuit
out of oxygen.
It is equipped with a connection
with a three spigots (NATO MIL-M27274 Standard) connection.
The orientation of the side
connection on the cap (backwards) allows the advance and the fixing of
the oxygen supply pipe along the life jacket of the pilot decreasing the
mass thus to be supported at the time of the movements of head. This advance
of the oxygen supply pipe also has the advantage of completely releasing
the visual field of the pilot forwards and downwards.
This mask must be carefully fitted
to the face and be of the right size to ensure airthight fitness.
RACCORDENTS ELECTROACOUSTIQUES
A radio cable, fixed to the pipe
system by five silicone elastomer clips of the same quality and of the
same color than the oxygen pipe and the face piece.
The intercom connector is
carried out by intermediate of a plug with 10 contacts. The
cable exceeds 350mm of oxygen supply pipe.
The other end is separate in two
circuits.
- one going directly to the microphone
- The other is being connected
to the helmet by intermediate of a miniaturized plug with nine pins moulded
being fixed at the helmet by two unlosable screws.
Ce cordon d'alimentation est cablé
pour alimenter un microphone
"Haut Impédance" et deux
écouteurs "Haute Impédance" = 300 ohms
Cables en série.
ENTRETIEN
Trousse de nettoyage et de désinfection
ULMER réf.8426A
MASSE : 460 g +- 30 g
CLAUSES TECHNIOUES Adm 2478
Edition originale de FEVRIER 1988 |